PROSEPT Impression - Impression Disinfectant



 
PROSEPT® Impression – The gentle disinfectant concentrate for impressions made of alginate, polyether, and silicone.
PROSEPT® Impression is a liquid concentrate for a gentle and yet very efficient and fast disinfection of dental impressions, impression trays, dental lab instruments, and prosthetic material. Tests show that the dimensional stability of impressions made of alginate, polyether, polysulfide, A-silicone, and C-silicone or plaster compatibility remain unaffected. No discoloration or blood and protein fixation will occur on the treated material thanks to the absence of aldehydes. In addition, a careful selection of tensides ensures strong cleaning power and eliminates the need for pre-cleaning of the objects even in the presence of high organic contamination. The strong concentrate yields up to 50 times more working solution than a conventional product. PROSEPT® Impression is easily biodegradable and is pleasantly fragranced. A specially designed lid with a 20 ml volume marking ensures easy handling and high dosage accuracy.
Advantages at a Glance
  • Will not alter the form or dimensional stability of dental impressions
    The disinfectant has no negative effect on the form or stability of dental impressions.
  • Short exposure time
    The short exposure time increases your work safety since the disinfectant is active within only 2 minutes.
  • Economical to use
    The solution can be used for up to 1 week.
  • Simple application
    Volumes are indicated on the lid for fast and easy dosing of disinfectant concentrates.
Effective Spectrum / Exposure Times
Bactericidal (1,2,7) 1% in 2 min.
3% in 1 min.
Yeasticidal (1,3,7) 1% in 2 min.
3% in 1 min.
Limited spectrum virucidal (4,5) 1% in 2 min.
3% in 1 min.
Bovine viral diarrhea virus (4) 1% in 1 min.
Hepatitis B virus (4,5) 1% in 2 min.
3% in 1 min.
Hepatitis C virus (4,6) 1% in 1 min.
Herpes simplex virus type 1 (4) 3% in 1 min.
Human immunodeficiency virus (4,5) 1% in 2 min.
3% in 1 min.
Influenza A virus H3N2 (4) 3% in 3 min.
Vaccinia virus strain Elstree (4) 1% in 2 min.
3% in 1 min.
Rotavirus strain Wa (4) 3% in 1 min.

(1) DGHM standard methods*, (2) EN 1040, EN 13727, EN 14561*, (3) EN 1275, EN 13624, EN 14562*, (4) RKI/DVV guidelines, (5) active against all enveloped viruses incl. HBV and HIV, (6) BVDV surrogate virus, (7) VAH/DGHM-listed in shortest exposure time category available (5 minutes), * carrier test
How Do I Use PROSEPT® Impression?

For your protection, wear disposable gloves and safety goggles. Prepare the working solution according to the instructions on the label. Use the volume markings on the inside of the lid for correct dosage. Immerse the impression materials completely. Ensure that the air has completely vacated all cavities. Follow contact times. After disinfection, rinse the impression materials thoroughly with cold water. Change the working solution twice or three times a week, depending on the degree of contamination. A daily change is recommended. Before first time use, test material compatibility.
Expert Reports

Dr. Jochen Steinmann, MikroLab GmbH, Bremen, Germany, 2004
Dr. Jochen Steinmann, MikroLab GmbH, Bremen, Germany, 2009
Prof. Dr. Heinz-Peter Werner, HygCen Centrum für Hygiene und medizinische Produktsicherheit GmbH, Schwerin, Germany, 2004
Anastasija Schlicht, Labor L+S AG, Bad Bocklet, Germany, 2009
Accessories
PROSEPT® Impression Soaking Tray
Soaking tray for the disinfection and cleaning of dental impressions.
Delivery Form
Item Code PROSEPT® Impression
OD-071041 1 litre bottle with measuring cap
Accessories for PROSEPT® Impression
OD-091077 PROSEPT® Impression Soaking Tray 1 litre, 1 piece

Excellent Material Compatibility
PROSEPT® Impression has been successfully tested for compatibility with the following materials: A-silicone, Acrylic glass, Alginate, Cast-iron, K-silicone, Polyether, Polyethylene, Polypropylene, Polysulfide, Polytetrafluoethylene, Polyvinyl chloride, Rubber, Silicone rubber, Steel
Why is PROSEPT® Impression so efficient?
Composition in 100 g: 30.0 g benzalkonium chloride, surfactants, cleaning booster, auxiliaries
Colour: Light yellow
Physical state: Clear, slightly viscous liquid
Scent: Aromatic
Density (20 °C): 1 (g/cm3)
pH-value (Concentrate): 10.5 - 12.5
pH-value (2% working solution): 8.6 - 10.6
Document Centre
Material Safety Data Sheet
Technical Datasheet
Danger
H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H410 Very toxic to aquatic life with long lasting effects. P280.1 Wear protective gloves, protective clothing and eye protection. P301+P312 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. P301+P330+P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P501.1 Dispose of contents/container in accordance with relevant regulations.
Customer Reviews
Ms* Mr
Title
First Name
Last Name
Position
Rating
Subject*
Message*
* Required